Cart is empty
Save 14% 
DC - Direct Drive Boat Lift Motor with Pendant Switch
Dreading your boat lift wheel? Didn't eat your spinach? Ditch your wheel and press a button with a powerful Direct Drive Boat Lift Motor that's faster and stronger than Popeye! Worried about working up a sweat with that boat lift wheel BEFORE you get out in the sun? Get rid of that wheel and enjoy the lake faster, more safely, and sweat-free! So easy that the women in the house will use the boat more too! Even grandma can swiftly lower the boat in a jiffy!
The DC - Direct Drive Boat Lift Motor offers two set up options using either a 12volt or a 24volt system. This motor, when coupled with one of Lake Lite's 12v Boat Lift Solar Charging Kits will keep your battery in top condition. Industry trend, however, is moving toward a 24volt system. For ultimate speed and performance, we recommend adding a Lake Lite 24v Solar Charging System! The 24v set-up increases the speed by more than double, getting you on the lake even faster!
The Direct Drive Boat Lift Motor will fit ANY boat lift that has a wheel. With a lift capacity of up to 7,000 pounds, the Direct Drive Boat Lift Motor installs easily in 20 minutes or less. Fully illustrated instructions are included, so get on the lake faster and stop cranking that boat lift wheel! Simply push the button on the pendant switch and your boat will be lowered into the water quickly and saftely. We guarantee you'll use your boat more!
Key Features & Benefits
2 Year Warranty Against Manufacturer Defects
DC 12 or 24v
7,000 lb Capacity
Pendant Switch
SPEED at 12v = 38 RPMs
SPEED at 24v = 80 RPMs
Direct Drive Boat Lift Motor with Pendant Switch Kit Includes:
DC Manual Boat Lift Winch Motor
Pendant Switch
Installation Kit
Free Technical Support
Sort by:
Dutton-Lainson Install by 07/22/2019, 11:31:00 AM
I just installed this exact kit on my DL 2500 cantilever pontoon lift two days ago. Installation was fairly easy. It was actually harder to take the brake and wheel off than to actually mount the motor. The only knock is the spline. Since the motor and gearbox aren’t offset,...
I just installed this exact kit on my DL 2500 cantilever pontoon lift two days ago. Installation was fairly easy. It was actually harder to take the brake and wheel off than to actually mount the motor. The only knock is the spline. Since the motor and gearbox aren’t offset, only half of the spline was inserted into the gearbox. I wonder what affect this will have on the spline and/or the motor/gearbox in the future.
Prior to installing this motor, I had a wheel mounted motor, which wasn’t fully suited for my lift. As a result, there were times were it would take 10+ minutes to raise my boat lift and when you have people over, this is never a good look.
I timed both the up and the down of the system and I’m very impressed. It takes 1 minute 30 seconds to lower the lift and 1 minute 35 seconds to raise the lift.
I have a 23 foot pontoon boat that weighs approximately 2500 pounds with me on it and I’m only running this on 12 volts, which is around 32 rotations a minute. Imagine if I decided to add another battery; my pontoon would probably raise and lower in 30-40 seconds.
So far, I’m very impressed and I look forward to reviewing this after a year or two.
Prior to installing this motor, I had a wheel mounted motor, which wasn’t fully suited for my lift. As a result, there were times were it would take 10+ minutes to raise my boat lift and when you have people over, this is never a good look.
I timed both the up and the down of the system and I’m very impressed. It takes 1 minute 30 seconds to lower the lift and 1 minute 35 seconds to raise the lift.
I have a 23 foot pontoon boat that weighs approximately 2500 pounds with me on it and I’m only running this on 12 volts, which is around 32 rotations a minute. Imagine if I decided to add another battery; my pontoon would probably raise and lower in 30-40 seconds.
So far, I’m very impressed and I look forward to reviewing this after a year or two.
1
Owner by 06/05/2019, 10:21:00 AM
I was very please with the service, assisting us with our needs and the very quick response in getting the product to us
1
On PortaLift by 03/14/2018, 09:31:00 AM
Will be installing this on my new lift as soon as our ice is out on the lake.. I will update the message regarding the install process..
| Motor RPMs | |
|---|---|
| Motor Setup | RPMs |
| 12v | 38 |
| 24v | 80 |
Is it recommended to remove and store the Lift Tech Motor during the winter months?
Yes. If you remove your boat lift for the winter, it is recommended to store your Lift Tech Motor to protect it from the elements.
What is the max capacity of the Lift Tech Motor?
The Lift Tech Motor will lift vessels up to 7000lbs.
What lifts are compatible with the Lift Tech Motor?
The Lift Tech Motor is compatible with nearly all winch boxes with a wheel attached.
The Lift Tech Motor will work with lifts from:
Beach King
CraftLander (Nucraft)
Daka
Dock Rite
Dutton Lainson 1200B
Dutton Lainson 2500/3500
Dutton Lainson B1200A
Dutton Lainson B1500A
Feighner
Great Lakes Lift
Harbor Master
Hewitt
Lakeshore
Lakeside
Metal Craft
Newman
Northern Lights
Pier Pleasure
Port-A-Dock
RGC
ShoreMaster
ShoreMaster Whisper Winch
ShoreMaster Whisper Winch 2
ShoreMate
ShoreStation
Summit
Vibo
